Creating Routes
12
If using Previous Towns:
Select a town from the list of previously used towns.
Spell the name of the street and select from the available street list, then enter
the address number for the street (it must fall within the street number range
displayed at the top of the screen).
4.
Select the method to be used to calculate the route.
NOTE:
All the street names are indexed using the main significant words in their names
(i.e. not the prefixes or articles). However, there are some exceptions where you may
encounter problems trying to find a street by typing only the significant word in its name.
If this is the case, try typing the prefix or article of the street name first.
Creating a route using POIs
POIs (points of interest) have been preloaded into the Magellan CrossoverGPS for
commonly used categories such as hotels, restaurants, petrol stations, etc. Following the
steps provided you will be able to create a route to any of these destinations.
Creating a route to a POI by name
1.
.From the Main Menu, select
POI-Points of Interest
.
2.
Select the POI category and, if displayed,
the subcategory.
3.
Select
Spell Name
.
4.
Spell out the POI name. You do not need
to spell out the complete name. However,
the more letters you enter, the narrower
the search will be.
5.
Select
Current Position
,
Address
or
Town
Centre
.
The most common will be
Current Position
or
Town Centre
. In this case you could
be looking for any particular brand of petrol station nearest to where you are or
perhaps nearest to the centre of a town you are planning on going to.
If you select Town centre or address, you will need to input the name and select
from the list of available items before continuing.
6.
Select the POI from the list of POIs that you are looking for.
Scroll down the list of available categories to
select the one you are looking for. Select ‘Other’
for additional categories.
