22
MagCore®
Super /
MagCore® HF16
Plus
Prev
Maintenance
Update Program
Vender
Scanner Setup
Piercing Needles
System Status
Alarm History
Back
━ Update Program
━ Clean the Waste Box
You can use the USB to update the system.
Please copy the downloaded program to the root
directory of the USB Flash Drive. Then insert the
USB Flash Drive into the USB Port of the machine.
Please press “Update Program” after the USB
icon appears in the status list.
Please select YES.
The update is finished, please press OK to check
whether the UI version is correct.
Please dump the waste when the program is
completed, and wash the waste box every time.
Warning!
Please confirm the name of
UI version. If the version is not
correct, please execute the
update program again.
Start Updateing ?
Yes
Update Program
No
Please go System Status
to confirm the UI Version ?
Update Program
OK
System Status
Back
System Time Setup
MagCore Super
201401217-01-H
201401217-01-H
FFFFFFF-FF
99999
99999
Hours :
59
Minute
99999
Hours :
59
Minute
99999
Hours :
59
Minute
99999
Hours :
59
Minute
Modle :
HMI Ver. :
UI Ver. :
PLC Ver. :
Optics Ver. :
Optics Serial :
Power on Time :
UV Lamp Used Time :
D2 Lamp Used Time :