12
MagCore®
Super /
MagCore® HF16
Plus
━ If the optic test result is
over detection limit
Select to enable or disable the optic measurement
function. (MagCore Super Only)
(Not available for 105, 201, 202, and 211)
Please confirm the parameters and press the Start
button to begin the program.
Automated extraction process begins.
The extraction process is completed.
If you select the optic measurement funtion, you
can browse, print or output the test result to a USB
Flash Drive (please refer to the optic data chapter).
If the test result of the optic test shows the
concentration is over detection ( DNA >300ng/μl /
RNA > 240 ng/μl), the system will ask you to dilute.
A.Please record and save the
current measured data.
Please select YES.
Please check the value for each sample. If
there is a value showing DNA >300 ng/
μl or RNA > 240 ng/μl, please record
the number of the sample. It means the
sample needs to be diluted. After recording
the number of the slot, please insert the
USB Flash Drive and press the Save button
to save to current measured data. After
finishing the above steps, please press Next
Step.
10
7
8
9
102
Program Code :
Select Optic Measurement Function
Enable
Disable
Back
Press Start to Process
Back
201
Program Code :
Start
N/A
200
N/A
300
Enable
DNase :
Sample Volume :
Elution Buffer :
Elution Volume :
Optical Measurement :
Program Completed
OK
Completed
Print Data
Review Data
OK
Program Completed
OK
Program Completed
10X Dilution ?
Print Data
Yes
No
Program Completed
OK
Program Completed
10X Dilution ?
Print Data
Yes
No
Note the samples which need dilution
Prev
Barcode
1234567890
> 300
2.05
2.364
1.154
ng / μL ( DNA )
260 / 280
A260
A280
2014 / 01 / 30 09:19:59
Date
Next
Next Step
Save
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Stop
Program Processing
201
Program Code :
Start
Remaining Time
Process Message
2014/01/01 23:59:59
10 / 75
D2 Lamp OFF
1
The values are DNA >300 ng/μl /
RNA > 240 ng/μl
Please save the data in the USB Flash Drive
and transfer to computer, or the data in
the USB Flash Drive may be overwritten
later.
File name: OpticsSampleData.cvs
(MagCore Super Only)