MAGBEAST 5, Инструкции по безопасности и руководство оператора

Страница: 12 / 17

MAGBEAST 5
Operator’s manual for MAGBEAST 5 Drilling Machine
- 7 -
The motor scores, brush fires and little or
no power

Damaged Armature

Damaged Field

Damaged or Worn Brushes
The motor does not start or stop

Damaged or defective wiring

Contaminated reader

Defective or loose magnet in reader for speed control

Damaged or defective brushes
Heavy feed motion

Slide adjustments are tightened too hard

The slides, sliding surfaces are too dry

Shaft/Rack are contaminated
Magnetic holding power is too low

Damaged or decetive wiring

The work area/surface is not clean and/or dry

The work area/surface has poor magnetic ability

The work area/surface is not flat

The work area/surface is too thin (thinner than 10mm)
Motor only runs at maximum RPM

Damaged or defective wiring

Faulty control box
The operator recieves an electric shock

Damaged or defective wiring

Faulty magnet

The motor is heavily polluted
Fuse blows when magnet is activated

Damaged or defective wiring

Faulty magnet switch

Defective control box

Faulty magnet
Fuse blows when starting the motor

Damaged or defective wiring

Defective armature and/or field

Motors running too fast

Worn brushes

Defective control box
Troubleshooting Magbeast 5 (cont.)