MAG Sub H12, Руководство пользователя

Страница: 13 / 28

13
in
fo@mag-audio
.c
om
Tel./F
ax:
+38 044 277
-4
7-89
www
.mag-audio.com
WASP Line Array User Manual rev 1.00
WASP connection plate
1. SERIAL NUMBER FIELD.
Sticker with the systems
serial number is located here.
NEVER REMOVE THE SERIAL
FROM THE SYSTEM, AS IT IS
AN IMMEDIATE WARRANTY
VOID.
2. PARALLEL INPUTS. The
pair of parallel Neutrik®
Speakon connectors. Use this
connectors to connect power
amplifier and to feed the
signal to the parallel systems.
WASP line array passive connections
5.8.1. Passive connections
Suggested accessories:
CN-0021 (part No. 0204000007)
CN-0031 (part No. 0204000010)
CN-0032 (part No. 0204000011)
Use power amplifier with DSP or power amplifiers
with external speaker processor with WASP line
array.
MAKE SURE TO USE HIGH PASS FILTER
FOR WASP TO PREVENT EXCESSIVE CONE
MOVEMENT, RESULTING IN TRANSDUCER
DAMAGE OR FAST DETERIORATION.
Recommended HPF settings, suggested power
amplifier ratings, and connection pins are found in
table below:
System Amplifier power Amplifier impedance Connection pins Recommended HPF
WASP LF 600 - 1200 W 16 Ohm +1 -1 Specified by preset
WASP HF 100 - 200 W 16 Ohm +2 -2 Specified by preset
Sub H12 950 - 1900 W 8 Ohm Rear +1 -1 Specified by preset
Sub H12 Link Rear +2 -2
Sub H12 Link Front +1 -1
Sub H12 950 - 1900 W 8 Ohm Front +2 -2 Specified by preset
1
2
2
5.8. Passive speakers
1+1- LO 16 Ohm
2+ 2- HI 16 Ohm
Made in Ukraine www.mag-audio.com
DSP AMPLIFIER
WASP module
WASP module
WASP module
WASP module