background image

JSA200EL 2  6/3/15

WARNINg INFORMATION

This is the safety alert symbol. It is used to alert you to  
potential personal injury hazards. Obey all safety messages 
that follow this symbol to avoid possible injury or death.

   

           

 

 

IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING

BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING PROCEDURES, SAFETY WARNINGS  
AND MAINTENANCE REQUIREMENTS. SAVE THESE INSTRUCTIONS.

It is the responsibility of the owner to make sure all personnel read this manual prior to using this jack. It is also the responsibility of the jack owner to keep this 
manual intact and in a convenient location for all to see and read. If the manual or product labels are lost or not legible, contact Mac Tools for replacements. If 
the operator is not fluent in English, the product and safety instructions shall be read to and discussed with the operator in the operator's native language by  
the purchaser/owner or his designee, making sure that the operator comprehends its contents.

This product is intended only for lifting automobiles. Do not use or modify this product for any other purpose than that for which it was designed without  
consulting the manufacturer's authorized representative. The use of portable automotive lifting devices are subject to certain hazards that cannot be prevented 
by mechanical means, but only by the exercise of intelligence, care, and common sense. It is therefore essential to have owners and personnel involved in the 
use and operation of the equipment who are careful, competent, trained, and qualified in the safe operation of the equipment and its proper use. Examples of 
hazards are dropping, tipping or slipping of loads caused primarily by improperly securing loads, overloading, off-centered loads, use on other than hard level 
surfaces, and using equipment for a purpose for which it was not designed.

METHODS TO AVOID HAZARDOUS SITUATIONS

•  Read, study, understand and follow all instructions before operating this device
•  Inspect the jack before each use. Do not use jack if damaged, altered, modified, in poor condition, leaking hydraulic fluid, or unstable due to loose or missing 

 

  components. Make corrections before using  

•  Use only on a hard level surface free from obstructions so the jack is free to reposition itself during lifting and lowering operations
•  Lift only on areas of the vehicle as specified by the vehicle manufacturer 
•  Wear eye protection that meets ANSI Z87.1 and OSHA standards (users and bystanders)  
•  Do not use jack beyond its rated capacity. Do not shock load
• 

This is a lifting device only. Immediately after lifting, support the vehicle with jack stands capable of sustaining the load before working on the vehicle

 

•  Center load on saddle. Be sure setup is stable before working on vehicle 
•  Do not move or dolly the vehicle while on the jack 
•  Do not use any materials that may serve as risers, spacers or extenders between the stock lifting saddle and the load 
•  Do not use any adapters that replace the stock lifting saddle unless approved or supplied by the jack manufacturer 
•  Do not use or modify this product for any other purpose than that for which it was designed without consulting the manufacturer’s authorized representative 
•  Always lower the jack slowly and carefully
•  This product may contain one or more chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. 

Wash hands  

  thoroughly after handling

•  Failure to heed these warnings may result in serious or fatal personal injury and/or property damage

CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS

Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS, MAINTENANCE INSTRUCTIONS 
and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS SITUATIONS could cause accidents resulting in serious or fatal personal 

injury and/or property damage.

WARNING:

 Indicates a hazardous situation  

which, if not avoided, could result in death  
or serious injury.

WARNING

WARNING

WARNING

WARNING

THIS INSTRUCTION MANUAL USES THE FOLLOWING SYMBOLS AND DEFINITIONS TO ALERT YOU TO HAZARDOUS CONDITIONS WHICH MAY CREATE A RISK 
OF PERSONAL INJURY AND/OR PROPERTY DAMAGE.

Содержание JSA200EL









Отзывы: