ZH320 Ec
14
11/2021
9.
Change or turn the blades (11).
➢
Always turn ore replace both blades.
10.
Ensure that the blades (11) are placed on the
pins in the clamping jaw first, followed by the
blade carriers (12).
Fig. 6: Changing / turning the blades
11.
Reinsert the blade unit from the side into the
planing shaft.
12.
Ensure that blade carrier and blades do not
protrude at the sides from the shaft body.
Fig. 7: Inserting the blade unit
13.
Using the open-end wrench (C) provided,
tighten the hexagon head screws (9) from the
center outward.
Fig. 8: Tightening hexagon head screws
