-18-
2.3
Technical data
Operating mode
Continuous operation
Voltage, frequency
220-240 V~, 50/60 Hz
Power input (nominal load)
1200 max. 1400 W
Current at nominal load
6,0 A
Nominal volume flow
270 m
3
/h
Associated vacuum
280 mbar
Filter surface area
6000 cm
2
Dimensions
530 x 400 x 560 mm (20 55/64 x 15 3/4 x 22
3/64 in.) without MAX bracket
530 x 400 x 620 mm (20 55/64 x 15 3/4 x 24
13/32 in.) with MAX bracket (without hose hook)
Weight (without accessories)
15,6 kg (34.4 lbs.) without MAX bracket
16,8 kg (37.0 lbs.) with MAX bracket
Diameter intake port connection
Ø 66 / 58 mm
2.4
Noise emission specifications
According to BGIA "H" test certificate, the dust extractors class "M" have been tested to GS-BIA-M02 (07/02),
DIN EN 60335-2-69 (11/04) Annex AA, DIN 60335-2-69/A1 (11/05).
Noise pressure level of the measuring surface:
69 dB (A)
Ambient conditions:
< 40 °C
Noise values were measured acc. to EN 60704-1 on an open air test site at a distance of 1.5 m from the device
surface.
2.5
Scope of supply
Dust extractor S 35 M complete with:
2 folded filter cartridges, polyester nano-coated
1 PE discharge-disposal bag 25/35l
4 m extraction hose, inside-Ø 27 mm antistatic
1 operating manual
1 MAX bracket
2.6
Device description
The dust extractor S 35 M is a device for use as dry
and wet dust extractor.
Wet suction cleaning should be carried out without
filter bag. The filter cartridges are suitable for wet
vacuuming.
2.6.1
Prior to use
-
Pay attention to completeness and transport
damages when unpacking the device.
-
Prior to use, the users should be supplied with
information, instructions and training regarding the
use of the dust extractor and the substances for
which it is to be used, including the safe method to
dispose of the extracted material.
Diligently read these operating instructions before
starting up the dust extractor. It provides important
information on operation, safety, maintenance and
care. Keep the operating instructions in a safe place
and pass them on to the next owner when selling the
device.
