K55cc/KSS50cc
01/2022
15
Use the following procedure to route the
connecting cable:
1.
Route the connecting cable in the direction of
the cable grommet, away from the machine.
➢
For support, use the Velcro fastener on
the hose connector.
2.
Always keep the connecting cable as far away
as possible from the tool.
✓
Connecting cable routed.
Fig. 6: Routing the connecting cable
4.3
Chip extraction
Caution
Health hazards from wood dust
The dusts produced during work can be inhaled and can cause health damage.
➢
Harmful dust must be extracted with a HEPA 13 dust extractor.
➢
Wear a dust mask during work.
For all work that produces a significant amount of dust, connect the machine to a suitable external extraction
device. The air velocity must be at least 20 m/s [65 ft/sec].
The inner diameter of the hose connector is 35 mm [1.4 in].
