MAEVING RM1, Руководство пользователя

Страница: 57 / 84

57
TYRES
13. Remove the 2 bolts securing the brake caliper and detach the
rear brake caliper from the swinging arm.
Note : When refitting, tighten to 18 Nm.
14. Secure the brake caliper to one side, using string or a retaining
strap.
15. Undo, but do not remove, both axle nuts on the rear wheel axle.
Note
: Left-hand shown, right-hand similar.
Note : When refitting, tighten to 100 Nm .
16. Remove both rear wheel securing plate bolts.
Note : Left-hand shown, right-hand similar.
Note : When refitting, tighten to 35 Nm .
Caution : Make sure the rear wheel motor wiring harness
is not trapped or damaged while the rear wheel and motor
assembly is being removed.
! ! !
! ! !
! ! !
! ! !
! ! !
! ! !
15
16
13