4
INSTALLATION GUIDE
1.
Make sure that all the packing materials are removed from the inside of the door.
2.
WARNING! Check the oven for any damage, such as misaligned or bent door, damaged door seals or sealing surface, broken
or loose door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the oven
and contact qualified service personnel.
3.
This microwave oven must be placed on a flat, stable surface that is able to hold its weight and the heaviest food that is
likely to be cooked in the oven.
4.
Do not place the oven where heat, moisture, or high humidity are generated, or near combustible materials.
5.
For correct operation, the oven must have sufficient airflow. Allow 20 cm of space above the oven, 10 cm at back and 5 cm
at both sides. Do not cover or block any openings on the appliance. Do not remove feet.
6.
Make sure that the power supply cord is undamaged and does not run under the oven or over any hot or sharp surface.
7.
The socket must be readily accessible so that it can be easily unplugged in an emergency.
8.
Do not use the oven outdoors.
9.
Stacking and installation of the microwave oven. The maximum height of stacking shall be two units. The specific stacking
installation is as follows:
(A)
Remove the 6 screws indicated in the figure below.
(B)
Attach the mounting plate between the two machines and align the corresponding screw holes.
(C)
Install the 6 screws back to their original positions and tighten the screws