12
2.
Enter the program name, then select power level and time required for each cooking stage (maximum 3 stages). For
further information on maximum cooking times, see page 7. If the program time selected exceeds the maximum cooking
time, an error message will display. Then press the tick button to save changes.
3.
After setting all required programs, click the SAVE or SAVE AS buttons. SAVE will overwrite the current menu file. SAVE
AS will create a new menu file, to be saved in a network location of your choosing. Repeat the steps above to save as
many menu files as required.
4.
To upload to your Maestrowave Microwave Oven, the file must be saved with the name ‘menufile.hex’
5.
Add the required menu file to your USB stick, ready for upload to the machine. This should be the only file on the USB
stick. You are now ready to upload your saved menu programs to your Maestrowave Microwave Oven!
U
PLOADING AND DOWNLOADING
M
ENU
C
REATOR™
PROGRAMS VIA
USB
Connecting the USB to the microwave:
1.
Connect the programmed (as above) USB drive to the USB port at the right hand side of the control panel on the
microwave. A beep will sound to confirm connection.
2.
In standby mode, open the oven door and keep open. The display shows "0". Press and hold PROG button for 3 seconds.
The display shows "PROG".
Note: For USB, the file system must be FAT32, otherwise it may not be possible to download and upload menu data.
To download microwave factory menu settings to USB for editing:
1.
Follow connection steps 1-2 as above
2.
Press number button 5 once, the display dynamically shows the download process "00FU" → "99FU", and finally shows
"FHFU" and "PROG", and beep will sound to prompt upload completed.
3.
The programs will be generated on the USB as "UPLOAD.hex" menu data file, which can be read, edited and saved by
Maestrowave Menu Creator™ Software.
4.
Press STOP button once.
To upload custom menu files created using Menu Creator™ to the microwave:
1.
Ensure the USB has the required menu settings saved as filename ‘menufile.hex’. This must be the only file saved to the
USB in order for the upload to function correctly.
2.
Follow connection steps 1-2 as above
3.
Press number button 4 once, the display dynamically shows the download process "00FL" → "99FL", and finally shows
"FHFL" and "PROG", and beep will sound to prompt download completed.
4.
Press STOP button once.
A helpful video showing use of the Menu Creator™ Software and Upload/Download to the machine is
available via our You Tube channel. Search ‘rhhallcatering’ within You Tube, or visit www.maestrowave.com
or www.rhhall.com