10
S
ET MEMORY FUNCTIONS
The memory function includes: memory setting locking function, oven lamp setting function, buzzer setting function, power
saving mode setting function and restore factory settings.
Memory setting locking function:
1.
In standby mode, open the oven door. The oven door must remain open throughout this process.
2.
Press and hold PROG button for 3 seconds.
3.
Press number button 1 repeatedly to select lock (PL) or unlock (P) state (note that programs can only be added in an
unlocked state)
4.
Press ENTER button once.
5.
Press STOP button once to return to standby mode.
NOTE:
When the memory is set to a locked state, the system can run the automatic menu and double heating without pressing
the START button. Press number buttons to select menu, and the system will start automatically after 2 seconds.
The factory setting is "P".
Oven lamp setting function:
1.
In standby mode, open the oven door. The oven door must remain open throughout this process.
2.
Press and hold PROG button for 3 seconds.
3.
Press number button 2 repeatedly to select light on (LR1) or light off (LR2).
4.
Press ENTER button once.
5.
Press STOP button once to return to standby mode.
NOTE: The factory setting is "LR1", and the lamp is on when the door is opened.
Buzzer setting function:
1.
In standby mode, open the oven door. The oven door must remain open throughout this process.
2.
Press and hold PROG button for 3 seconds.
3.
Press number button 3 repeatedly to select
treble (bF1), midrange (bF2) or bass (bF3).
4.
Press ENTER button once.
5.
Press STOP button once to return to standby mode.
NOTE: The factory setting is "bF1",
Power saving mode setting function
1.
In standby mode, open the oven door. The oven door must remain open throughout this process.
2.
Press and hold PROG button for 3 seconds.
3.
Press POWER button repeatedly to select
Po1→Po2→Po3→Po4.
4.
Press ENTER button once.
5.
Press STOP button once to return to standby mode.
NOTE:
Po1: In standby mode, the system will return to standby mode if there is not any operation within 1 minute. Po2: 2
minutes. Po3: 3 minutes. Po4: Do not enter power saving mode.
When the door is opened, in standby mode, if there is no operation for 15 minutes, the oven will enter the power saving
mode.
The factory setting is "Po1",
Restore factory settings:
1.
In standby mode, open the oven door. The oven door must remain open throughout this process.
2.
Press and hold PROG button for 3 seconds.
3.
Press number button 0 once.
4.
Press ENTER button once.
5.
Press STOP button once to return to standby mode.