Maestro MR 920, Руководство пользователя

Страница: 7 / 52

7
- From time to time clean the intake grille to prevent any
blocking air intake.
- Overheating can be caused by obstruction to the air intakes on
the back of the machine or the grill on the front. If this occurs please
disconnect the machine and allow it to cool for 30 minutes. Remove
any obstruction and turn the machine back on.
Despite the fact that the device is equipped with protection against
overheating, it can be damaged, if air flow stops.
-THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY. Do not use
it in industrial or commercial areas (e.g. construction sides, stores
etc.), places with high dusty or humidity in the air.
DO NOT USE THE APPLIANCE FOR ANYTHING OTHER THAN
INTENDED USE.
Purchase industrial devices for commercial use.
Actions in extreme situations
- If a device tumbled into water, immediately, unplug the device, not
touching to the device or water.
- In case of appearance from appliance of smoke, sparkling, strong
smell of a burn isolation, immediately stop use the device, unplug
the device, appeal to the nearest service center.
Operation
Before the first use
Before you use it for the first time, remove the packing materials,
unwind the power cord completely. Make sure that all parts of the
device are not damaged.
First switching
Put the heater vertically on a firm dry horizontal surface. Always use
the heater in an upright position.
- Provide adequate air space above and on all sides for air
circulation. To ensure normal air circulation the heater shall be
installed in place where a clean space is at least 1 meter in front
EN