Maestro e200 series, Руководство пользователя

Страница: 232 / 250

MAESTRO WIRELESS SOLUTIONS | Services
231
E PACK | USER MANUAL VERSION 2.3 http://support.maestro-wireless.com
1 – GPS SPS Mode, fix valid
2 – Differential GPS, SPS Mode, fix valid
3 to 5 – Not supported
6 – Dead Reckoning Mode, fix valid
Satellite-Used Number of satellite used to receive GPS signals.
The range for the number of satellite used is 0
to 12.
HDOP Horizontal Dilution of Precision
MSL-Altitude Altitude in meters
Protocol
Enable Data Send Click Enable Data Send to data to the selected
server. It sends the GPS information in NMEA
format.
Protocol – Select the TCP protocol only.
IP1 – Enter the primary IP Address.
Port1 – Enter the Port Number.
Backup – Click to allow using of backup IP,
in case sending of the data fails using
primary IP Address. In case the backup IP
Address fails, primary IP Address will be
used. Three such trials will be executed.
•
IP2 – Enter the backup IP Address.
•
Port2 – Enter the backup Port Number.
Send Interval in Minute – Time interval in
minutes to try sending the data using
primary IP Address and backup IP each
time.
Table 9.8-1: GPS Service Configurations