Maestro e200 series, Руководство пользователя

Страница: 90 / 250

MAESTRO WIRELESS SOLUTIONS | Network
89
E PACK | USER MANUAL VERSION 2.3 http://support.maestro-wireless.com
Bring up on boot for 3G interface is checked by
default.
Use built-in IPv6 -
management Allows to use the built in IPv6 management
configuration.
Enable IPv6
negotiation on PPP
link
Click to enable IPv6 negotiation on PPP link.
Modem init
timeout
Enter the maximum wait time in seconds for the
modem to become ready.
The default modem initiation timeout 20
seconds.
Use default
gateway
Click to configure a default gateway route.
None of the gateway routes are configured by
default.
Use gateway
metric
Enter the gateway metric.
The default metric is 1.
Use DNS server
advertised by peer Allows the router to advertise the DNS server
address.
Use DNS server advertised by peer for 3G
interface is checked by default.
LCP echo failure
threshold Presume peer to be dead after configured LCP
echo failures. Use 0 to ignore failures.
LCP echo interval This is time the router should wait before
sending an echo request to check whether the
link is alive or not.
The LCP echo interval by default is 20 seconds.
Inactivity timeout The Router will wait for the LCP echo request
response for the LCP Echo interval defined after
every attempt. It declares LCP link as closed if it
does not receive response after this defined
period of attempts
Use 0 seconds to persist the connection.
Table 8.1-7: Advance Configuration of CELLDHCP Interface