Maestro e200 series, Руководство пользователя

Страница: 205 / 250

MAESTRO WIRELESS SOLUTIONS | Services
204
E PACK | USER MANUAL VERSION 2.3 http://support.maestro-wireless.com
9.1.5 OpenVPN
Services > VPN >OpenVPN
Open VPN is an open-source software application that implements virtual
private network (VPN) techniques for creating secure point-to-point or site-to-
site connections. It uses the Open SSL library to provide encryption of both the
data and control channels. Open VPN can run over User Datagram
Protocol (UDP) or Transmission Control Protocol (TCP) transports, multiplexing
created SSL tunnels on a single TCP/UDP port. Open VPN fully supports IPv6 as
protocol of the virtual network inside a tunnel and the Open VPN applications
can also establish connections via IPv6. It has the ability to work through
most proxy servers (including HTTP) and is good at working through Network
address translation (NAT) and getting out through firewalls. The server
configuration has the ability to "push" certain network configuration options to
the clients. These include IP addresses, routing commands, and a few
connection options.
E220 series supports Open VPN client, Server and Pass Through.
A. Open VPN Client
You can access the Open VPN client in Services / Open VPN.
Open VPN Client will attach itself to the configured Open VPN server over any
available WAN interface. If the auto-connect function is enables, Open VPN will
not only connect over available WAN but also switch between WANs as and
when one WAN fails-over to another and also auto starts in every reboot. This
can be achieved by clicking on the enabled tick box.
You can either edit the sample client or create your own configuration from
ground up.
Note
•
Only OpenVPN client is supported.
• You must manually enter the DNS from Network > DHCP and DNS .