Footrest adjustment - push simultaneously the buttons located on both
sides of the footrest and adjust it to the necessary height (Fig. 28).
Every stroller unit has a bumper; the protection fastened to it prevents
the child from getting out of the carriage. Press simultaneously the red
buttons located on both sides of the handle, adjust it to a height
convenient for you (Fig. 29).
If it is necessary to remove the bumper, press the buttons and pull the
handle up (Fig. 30).
If you wish to reinstall the bumper, insert it in the holes of the holders
located on both sides of the stroller unit (Fig. 30).
The stroller unit is equipped with five-point seatbelts.
To fasten the child with seatbelts, insert seatbelt buckles into locks and
stretch the belts (Fig. 31). In case it is necessary to unfasten the belts,
push a button and remove buckles from the locks (Fig. 31).
CARRYCOT
It is possible to install a carrycot on the carriage frame as well. It must
be fastened to specially made adaptors (Fig. 34).
If it is necessary to fasten the carrycot, insert the adaptors into the
adaptor pockets on the frame (Fig. 34) and fasten the carrycot (Fig. 35).
The adaptors are blocked automatically.
The carrycot is equipped with a cover for the child's feet that is
fastened to the carrycot body by snappers (Fig. 35) and safety belts.
To remove the carrycot from the frame, press simultaneously the button
located on both sides of the seat (Fig. 36).
The carrycot may be fastened in a car by car seatbelts.
ASS
EMBL
Y
AND
OP
ERA
TI
ON
