The cradle is equipped with a convenient folding hood that protects the
child from natural phenomena (wind, sun, snow, rain).
The position of the cradle hood is adjusted with the help of two buttons
located in the bottom of the hood (Fig. 17).
The cradle is equipped with an additional handle for carrying (Fig. 18).
The cradle is equipped with a cover for the child's feet that is attached
to its front and fastened with a zipper and snappers on both sides (Fig.
19).
The cradle hood is ventilated; for that, unfasten the zipper on the roof
and turn down the bottom part (Fig. 20).
The baby carriage is equipped with insect protection (Fig. 21).
The baby carriage is equipped with rain protection suitable both for the
cradle and the stroller unit (Fig. 22, 23).
STROLLER UNIT INSTALLATION/DEINSTALLATION
To install the stroller units, insert its adaptors into the adaptor pockets
located inside the frame (Fig. 24). The stroller unit adaptors are blocked
automatically. To remove the stroller unit, press the stroller unit
adaptor buttons and lift it up (Fig. 24).
The stroller unit backrest can be adjusted to a necessary height with
the help of a knob located on the back of the seat (Fig. 25).
STROLLER UNIT HOOD AND COVER FOR FEET
ASS
EMBL
Y
AND
OPER
A
TI
ON
