Maeda MC174 Скачать руководство пользователя страница 4

 

- 2 -

2. FOR SAFE USE OF MACHINE 

This manual classifies the risks into the following three categories to present the details of the safety 

labels in easy-to-understand manner. 

 

 

 

This denotes that there is an imminent hazard which will cause serious 
personal injury or death. 
The method of hazard circumvention is stated. 

 

   

 

 

This denotes that there is a hazard which can cause serious personal 
injury or death. 
The method of hazard circumvention is stated. 

 

   

 

 

This denotes that there is a potential hazard which may cause minor or 
moderate personal injury or serious damage to this machine. 
The method of hazard circumvention is stated. 

This manual also provides the following to indicate what must be observed for the sake of the machine 
and what will be of help. 

CAUTION 

 

This denotes that failure to handle the machine properly may damage 
the machine or shorten its life. 

 

 

 

NOTES 

 

This denotes helpful information.

 

 

Not only procedures for operation, inspection, and maintenance of this machine described in this manual 

but also safety precautions should pertain to the case where this machine is only used for specified tasks. 

Every circumstance incidental to use of this machine is unforeseeable, and therefore, cautions given in 

this manual and on this machine do not necessarily cover every safety-related issue. 

Necessary safety actions should be taken under your responsibility if operation, inspection, and 

maintenance in a situation that is not described in this manual are performed. 

Even in the above case, never attempt work and operations that this manual prohibits you to do.

 

 
 
 

 

 

 

Содержание MC174


















Отзывы: