- 10 -
6. Insert the position pin (4) through the hole of bracket (3), and
secure it with the snap pin (5) to the tip of position pin (4).
Always secure the position pin (4) with the snap pin (5). If
the snap pin falls out during operations, serious injury or
damage to the machine may result.
7. Attach the load securely to the hook (1) and start operations.
Always work in accordance with all appropriate local
regulations concerning your own and others’ safety.
8. In case machine is automatically stopped in overload condition,
boom can be lifted using the boom lift by-pass switch (6).
To operate boom lifting using this boom lift bypass
switch(6),keep pressing the switch to upper side and operate
boom lift at the same time.
After the work, release the switch and it automatically turns off.
The boom lift bypass switch is to be used only when in
searcher hook mode.
The boom lift function is stopped automatically when
overloaded.
Use this switch to enable the boom lift function for safety.
This switch is for emergency use only, never use this for
normal lifting of loads clear of ground.
NOTES
In case machine is automatically stopped by entering overload area
by boom lowering or boom extending operation, recover from the
overload area by retracting boom, or lifting boom by keeping the
boom lift by-pass switch to ON side.
NOTES
When working envelope is set, and operation automatically stops at
the boom upper angle limit or hook height upper limit, boom can be
lifted beyond the limit by using this boom lift bypass switch.
The boom lift bypass switch is to be used only when in searcher
hook mode.
ＸＡＭ２９０５０ 新規