Maeda LC785M-8B Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 401

Maeda LC785M-8B Скачать руководство пользователя страница 76

2.1.3 CAUTION ITEMS

If the warning monitor lights up red, Stop operations as soon as possible and perform
inspection and maintenance of the applicable location. If the warning is ignored, it may lead to
failure.

These are items that should be observed while the engine is running. If any abnormality occurs, the
screen displays the item that needs immediate action.
If there is an abnormality, the monitor for abnormal location lights up red.

(1) Engine coolant temperature monitor

(3) Fuel level monitor

(2) Hydraulic oil temperature monitor

(4) Charge level monitor

ENGINE COOLANT TEMPERATURE MONITOR

If this monitor (1) shows low-temperature display (A), carry
out the warm-up operation.

For details, see “Operation 3.3.1 Engine Warm Up”.

This monitor (1) will show normal display (B), so carry out
the warm-up operation for engine.
This monitor (1) will show abnormal display (C), stop
operations and run the engine at low idling until monitor (1)
change to normal display (B).

• Display (A) at low temperatures: Monitor background (D) is white

• Display (B) at correct temperatures: Monitor background (D) is blue

• Display (C) when condition is abnormal: Monitor background (D) is red

3-12

«
...
74
75
76
77
78
...
»

Содержание LC785M-8B


















































































































































































































































































































































































































Отзывы:

Нет отзывов