1-11
5.3 PARKING THE MACHINE
• Park the machine on a level and solid ground but avoid a
slope. If you have no choice but to park on a slope, apply
a block to prevent the machine to come-down; and direct
the Blade downward and make it bite the ground, as
shown on the figure on the right.
• To touch operation levers carelessly may cause a sudden
motion of the crane or machine body which incurs a
serious hazard. Always shift the safety lock lever to the
lock position securely before you leave the operator’s
seat.
1. Release your foot from the acceleration pedal (5).
2. Return the left and right traveling levers (3) to N (neutral)
position.
3. Shift the Blade control lever (7) to “lower” direction so that the
Blade touches the ground.
4. Turn the fuel adjustment dial (6) to “low idling”
position and
decrease the engine speed.
5. Turn the starter switch key to the “OFF” position and stop the
engine, then pull out the starter switch key.
6. Lock the control levers securely with the safety lock lever (4) to
the lock position.
Содержание 31460
Страница 2: ......
Страница 7: ...1 5 2 2 SAFETY LABEL LOCATIONS INSIDE THE CABIN...
Страница 20: ...1 18 8 2 DIMENSIONS...
Страница 21: ......