madur electronics GA-21 plus Скачать руководство пользователя страница 8

Страница: 8 / 60

www.madur.com

Manual

GA-21Plus

parameters the analyser calculates a variety of combustion parameters such as Stack

Loss - SL, Efficiency -

, Excess Air -

, Loss through Incomplete Combustion - IL.

The

GA-21

plus

also measures differential pressure.. This can be used to meas-

ure the draught or pressure in the flue gas channel. The instrument is also equipped for

the soot test according to Bacharach methood.

The analyser is also fitted as a 3 channel data logger, capable of measuring

voltage or current together with temperature using thermocouples or thermoresistors.

The instrument can be used at a broad range of ambient temperatures (0 - 50°C).

It is fitted with a rechargeable battery making it independent of the mains power supply.

Hence, the

GA-21

plus

is ideally suited for all those involved in the construction,

maintenance and adjusting of heating systems.

The keyboard of the instrument can be wiped clean if necessary.

The GA-21

plus

is controlled by a microprocessor. The easy-to-read LCD dis-

play, the comprehensive keyboard and the built-in printer allow the operator to communic-

ate with the instrument easily and to document the measurements on the spot. The EEP-

ROM memory used in the

GA-21

plus

allows large quantities of data to be stored without

fear of data loss should the instrument be switched off or should the battery be accident-

ally run down. The

GA-21

plus

comes complete with programmed data for the 18 most

common fuels. A further 10 fuels can be programmed by the operator to cover all eventu-

alities.

The RS232C interface fitted to the

GA-21

plus

allows all stored data to be read

for later treatment or the instrument can be used on-line with the computer.

Содержание GA-21 plus





























































Результаты поиска

Содержание GA-21 plus

Отзывы:

Похожие инструкции для GA-21 plus

Бренды по названию

Популярные бренды

madur electronics GA-21 plus, Руководство по эксплуатации

Результаты поиска

Содержание GA-21 plus

Отзывы:

Похожие инструкции для GA-21 plus

Бренды по названию

Популярные бренды