www.madur.com
Manual
GA12
Drawing 18.
Reports screen
To view a report select it from the Reports screen (use up / down arrow keys) and
press Right arrow key. Each report consists of four screens which contains stored values
of measurements. Right function key (beneath the icon
) switches between the con-
tents of the report. Each screen is organised into columns. The left column shows results
of a single measurement. The middle column shows averaged results of three measure-
ments – in case of triple XL test report. In case of single report the left and the middle
column show the same results (as shown in the drawings below). The right column shows
the label and the unit of the value. In the top bar there is an info about the type of the
stored report: (1/1) – Single XL test; (1/3; 2/3; 3/3) – triple XL test.
a)
b)
Drawing 19.
Report's results screen: a) Single XL test 1/1; b) Triple XL test 1/3.
The middle function key
1-2-3
switches between the following measurements re-
ports of a triple XL test.
The Print function key in the Reports screen calls the screen in the picture below:
Drawing 20.
Confirmation of a single report printout
20