2
4
Display
See "Display, Nº30."
5
display intensity
Pressing this button varies the brightness of the Display. Four
brightness levels are available.
When power is first applied to the Nº30 (or when power is restored
after an interruption), the Display is automatically set to its brightest
level.
Pressing the
display intensity
button once dims the Display one
level; pressing it again dims it further; pressing it again turns the
Display off. Pressing
display intensity
once more returns the Display
to its brightest level.
6
digital record select
Pressing this button allows you to select the digital source you want
to record.
It's possible to record a different digital source than the one
selected for listening.
To record a digital source, press
digital record select
. The Nº30's
Display will show
RECORD
followed by the source currently
selected. For example:
If you want to record a different source than the one currently
selected, press the corresponding source selection button; the
Display will then show the input number of that source (for
example,
RECORD DBS2
).
After a few seconds, the Display will return to normal.
When using a digital recorder (like a DAT) that also allows
recording of analog signals, a specific combination of
interconnections and settings on the digital recorder, the
Nº30, and an associated preamplifier may create a
"feedback loop" that may damage your system's
loudspeakers. For guidance in avoiding such a feedback
loop, consult your Mark Levinson dealer.
PRECAUTION