10
Unpacking and placement
Unpack your Nº30 Reference Digital Processor/PLS-330 Power Supply
and remove all accessories from the cartons. Keep all packing
materials for future transport.
Carefully inspect your Nº30. If you find any damage or flaws, see your
Mark Levinson dealer immediately.
The Nº30 should be placed as close as possible to your digital source
equipment, thus keeping interconnect cabling as short as possible. It
may be placed on a shelf or in a cabinet where it's convenient to
operate.
Three DC cables are provided to connect the PLS-330 to the Nº30.
Their lengths allow you to place the PLS-330 so that it won't induce
hum in the Nº30 and other sensitive components. Other associated
equipment should also be placed so that it doesn't induce hum in the
Nº30 and other sensitive components.
Be sure to allow 3 to 4 inches of clearance above both the Nº30 and
the PLS-330, to allow heat dissipation through air circulation.
Drawings are included in this manual to facilitate special installations
and custom cabinetry (see "Dimensions").
Unpacking
Placement
Ventilation
Custom installations