16
Be sure all associated equipment is disconnected from the AC mains.
After making all signal connections and internal adjustments, connect
the left channel's
analog dc in
on the rear panel of the Nº30 to the
left
audio dc out
on the rear panel of the PLS-330; likewise, connect the
right channel's
analog dc in
on the rear panel of the Nº30 to the
right
audio dc out
on the rear panel of the PLS-330.
Connect
digital dc in
on the rear panel of the Nº30 to the
digital dc
out
on the rear panel of the PLS-330.
Connect the AC cord to the AC power connector on the bottom
panel of the PLS-330, then connect the AC cord to the AC mains; the
LED on the PLS-330 and the
standby
LED on the Nº30 will light. After a
few seconds, the Nº30 will begin its self-test (the Display first shows
INITIALIZING
, then each of the eight input aliases, and finally
LOCKING
as it attempts to lock onto input 1).
Allow the Nº30's circuitry to stabilize for 1 to 2 minutes, then connect all
associated equipment to the AC mains and activate it.
The Nº30 is now ready to operate.
For optimal sonic performance and longevity, the Nº30/PLS-330 is
designed to remain powered at all times. The
standby
button is
provided so that you may turn off the Display and disable the front-
panel controls when the Nº30 isn't in use (see "Front panel, Nº30").
Power connection
and system activation