Madge Networks CrossFire 8300, Руководство по эксплуатации

Страница: 31 / 68

21
CrossFire 8300/8301 Stacker Guide to Operation, DOC-7092 v. 1.0 4. Installation
Figure 5. Connecting the Stack Port Cable to the Stack Port on a Switch
2. Attach the other end of the cable to the port connector on the CrossFire 8630
Module (see Figure 5).
➽
➽ ➽
➽
Note: You cannot use the CrossFire 8635 Internal Stacker Module instead of the
CrossFire 8630 Module to form a stack with the CrossFire 8300 Switch Stacker.
3. Repeat these steps for each switch in the stack.
Figure 6 shows the switch stacker cabled to eight switches. Three switches have
been mounted above the switch stacker and five below. The lowest switch has been
connected to port one on the switch stacker and is defined as Box 1. The highest
switch has been connected to port eight and is defined as Box 8.
L I
R
T
TX
RX
ATTACH