Madge Networks CrossFire 8300, Руководство по эксплуатации

Страница: 21 / 68

11
CrossFire 8300/8301 Stacker Guide to Operation, DOC-7092 v. 1.0 2. Switch Stacker Operation
Once the system request button is pushed on one of the switches, that unit
becomes the stack provider and the other switches will replace their stack
related configuration parameters with the parameters of the provider. Note that
the system request button is unlabeled.
•
The following applies to a back-to-back stack, consisting of two switches that
each has a CrossFire 8630 Stacker Link Module installed:
If you turn on two switches in a back-to-back stack before you connect them,
they will continue to perform their stand-alone internal switching functions.
While the normal internal switching functions are still operating, a split-stack
will be formed. Once the split-stack is formed, the console displays the
warning message requiring a system request. Pushing the system request
button on one of the switches will give the stack the inter-box parameters of
that switch and allow the stack forming to continue.
•
If you add switches to an existing stack, the inter-box parameters in the
existing stack will be used.
❏