Manual
20
10.
Align elements of ridge profi le lengthwise mounting
screw threaded ends outside
(Fig. 27)
.
Put polycarbonate sheet halves connected by adhesive
Fig.27
9.
9. For top coverage,
cut 6x2.1 m sheets in
halves per 3x2.1 m pieces
keeping right angle of
cutting line to sheet side
edge. Then put halves
together by cutting line
with aligning the side
edges and positioning
protective layer outside.
Eliminate mismatch
of edges after cutting
halves and putting them
together by cutting of
outstanding edge.
If edges’ outstanding
(cutting error) exceeds 5
mm, level both edges by
ruler to provide right angle
of cutting edge to side
Fig.26
adhesive
tape
adhesive
tape
3000
2100
edges. Remove protective
fi lm from polycarbonate
without violation of relative
position of sheet halves.
Cover polycarbonate
cellular with adhesive tape
and then join the halves
with adhesive tape by
cutting edges. (
Fig. 26)
.
Cutting and fastening of coverage
