Page 8
For technical questions, please call 1-888-866-5797.
Item 58814
SA
FE
TY
OP
ERA
TI
O
N
MAINT
ENANC
E
IN
ST
ALLA
TI
O
N
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM BEAD SEATER FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1.
BEFORE EACH USE,
inspect the general
condition of the Bead Seater. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• any other condition that may
affect its safe operation.
2.
AFTER USE,
wipe external surfaces of
the Bead Seater with a clean cloth.
Maintenance Schedule
Following are general guidelines for maintenance checks of the Bead Seater.
Note:
The environment in which the Bead Seater
is used, and the frequency of use will affect how
often you will need to check the Bead Seater
components and perform maintenance procedures.
Daily:
a. Make sure all connections are tight.
b. Drain moisture from air tank.
c. Check for abnormal noise or vibration.
d. Check for air leaks by applying soapy
water to joints while the Bead Seater is
pressurized. Look for air bubbles.
e. Wipe off any oil or dirt from Bead
Seater with a damp cloth, using a
mild detergent or mild solvent.
