Page 6
For technical questions, please call 1-888-866-5797.
Item 58814
SA
FE
TY
OP
ERA
TI
O
N
MAINT
ENANC
E
IN
ST
ALLA
TI
O
N
Functions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Tank
Pressure
Relief Valve
Pressure Gauge
Fill Valve
Discharge
Valve
Nozzle
Nozzle Lip
Assembly Instructions
WARNING! TO PREVENT SERIOUS
INJURY AND DEATH FROM EXPLOSION:
Install supplied components only. Do
not replace any component with objects
not supplied.
1. Assemble on a stable, flat surface.
2. Install PTFE tape (not included)
onto Adapter (10) threads.
3. Install Discharge Valve (11) in closed
position with handle facing left, onto Adapter.
Place Lock Nut (12) onto Nozzle (13).
4. Install PTFE tape onto Nozzle threads.
5. Thread Nozzle into Discharge Valve until
hand tight with Lip facing up, loosen if
necessary so that Lip faces up.
6. Tighten Lock Nut with spanner wrench.
WARNING!
TO PREVENT SERIOUS
INJURY: Install PTFE tape correctly so tape
does not obstruct valve operation.
7. Wrap PTFE tape around threads
of Pressure Gauge (3).
8. Install Pressure Gauge onto Tank (1).
9. Wrap PTFE tape around threads
of Quick Coupler (9).
10. Install Quick Coupler to Fill Valve (8).
