Mad Catz CAT 7, Руководство пользователя

Страница: 7 / 93

CONFIGURING THE REMAPPABLE BUTTONS
1. Press PROG bu�on to enter program mode, use the up and down bu�on on the
D-PAD to select Profile 1 or Profile 2 for edit.
2. Press SET bu�on to enter se�ng mode, the screen shows "program mode"
4. Press the SET bu�on to end configura�on and back to the normal “GAMEPAD” state.
PROG SET
Profile 1
Program mode
3. While press and hold the extended bu�on, you can configure:
K3
K4
K5
K6 ON
OFF X D
Press any of the basic bu�ons
to assign its func�on to the
extended bu�ons, then set up
will be completed a�er you
release the bu�ons.
K3 set to X
Press the SET bu�on to disable
the se�ng of this extended
bu�ons ; the display shows
and back to “Program mode”.
K3 disabled
OR
The 6 extended programmable bu�ons (K1, K2, K3, K4, K5, K6) can set the remappable
func�on. It can store up to 2 memory profiles on board at the same �me.
SET
Program mode
GAMEPAD
07