Macsense MP-100 HomePod, Руководство пользователя

Страница: 32 / 49

26
To set the network mode, click on the appropriate button.
In the ad-hoc mode, the Channel defines the frequency at which
HomePod will communicate with the other ad-hoc device, in this case
another computer. Both the HomePod and the other computer must
operate in the same network name and channel. The channel field is not
used if the network mode is set at infrastructure.
To set the channel, pull down the list and select a channel from 1
through 14.
If the access point has WEP Encryption turned on, then HomePods
needs to be set with the same encryption parameters, and also have the
matching key.
To turn on WEP encryption on the HomePod, select the Enable button
and click either the 64-bit or 128-bit option. Enter the WEP key in hex in
its respective field, Key 1 through 4; normally only Key 1 is used. If the
WEP Encryption is 64 bit, the hex key requires 10 characters. If the
WEP Encryption is 128 bit, the Hex key requires 26 characters. A hex
key is a continuous stream of hex characters (0-9, A-F) without hyphen
or space between them.
Note: For WEP encryption, set the base station or access point to use the
“Share Key” mode.
After saving the changes, you must restart your HomePod for the new
settings to take effect.
8.3 Miscellaneous Page
This page enables you to configure other useful functions of the
HomePod. After saving the changes, you must restart your HomePod
for the new settings to take effect.
8.3.1 LCD Sleep Function
HomePod offers a LCD sleep function that will turn off the LCD if you
have not access the buttons for a specified period of time. The audio will