Enter the Web-based configuration:
1.
Launch your computer’s Web browser.
(
NOTE
: Netscape Communicator 4.0, Internet Explorer 4.0 or
above are necessary for configuring the XRouter Pro.)
2. Type the XRouter Pro's default IP address (
192.168.1.1
) in the
URL field. This is the area where you would normally enter a
Web site address such as “www.macsense.com”.
3.
Press
Enter
. The Username and Password window appears.
4.
Leave the User name field blank and type “
admin
“ as the
default password for the XRouter Pro. You can change the
password through a Web management page later. Click
OK
to enter the Web management page.
(
Note:
It is recommend to change the default “admin” password of
of your XRouter Pro so that others users of the network can not
have access to the web based configuration of the XRouter Pro.
This can done through “
Device Admin
” page of the web based
configuration of the XRouter Pro. More information of about the
“
Device Admin
” page of the XRouter Pro can be found in the
Advanced Configuration
section in this manual.)
Easy Installation
15
