Mac OS TCP/IP Configuration
1.
Open the
TCP/IP
control panel.
2.
In the
Connect via
menu select the
Ethernet
interface that is
installed on your computer.
3.
In the Configure pull-down menu that appears, select
Using
DHCP Server
to allow the built-in DHCP server of the XRouter
Pro to assign an IP address and other TCP/IP configuration
information to the client automatically. Do this for each client
that needs Internet access through the XRouter Pro.
(
Note:
The DHCP Client ID field is not require to connect to
the XRouter Pro. It is normally used to identify computers in a
DHCP network. If you desire to input the name of computer in
this field, you may. )
4.
Close the TCP/IP window and save the changes.
12
Easy Installation
