Software Configuration
Setting Up TCP/IP
Congratulations on installing the XRouter Pro’s hardware! In the
next pages we will show you how to enable communication between
the XRouter Pro and its managing and client computers.
Part of the process of enabling communication involves setting the
IP addresses for the computer that will be directly managing the
XRouter Pro’s operations and the client computers that will be receiv-
ing Internet access from the XRouter Pro. These computers must have
their IP addresses configured such that they share the same subnet
numbering scheme as the XRouter Pro’s default IP address. We will
explain this in more detail later in the chapter.
Configuring the IP addresses of the managing and client comput-
ers is a simple process that can be performed through your computer’s
control panel. We have provided instructions for the configuration
process for both Macintosh and PC users. Find the appropriate set of
instructions in the pages that follow.
Windows 95/98 TCP/IP Configuration of Computers
1.
Double-click the
Control Panel
icon in
My Computer
folder.
2.
From the
Control Panel,
double-click the
Network
icon. The
network interface card (installed on your computer) appears
along with the network protocol on the Configuration list.
3.
Double-click
TCP/IP
protocol on the list. If
TCP/IP
does not
appear on the list, you must install the TCP/IP protocol first as
illustrated in step 4. Clients with TCP/IP already installed may
skip to step 5.
8
Easy Installation