MACROMEDIA COLDFUSION MX-CLUSTERCATS, Руководство пользователя

Страница: 98 / 156

88 Chapter 4 Configuring Clusters
The monitor’s Properties dialog box appears:
3 Click the New Probe button .
The JRun Application Probe settings dialog box displays.
4 Configure the application probe settings as described in the table in “Using JRun
probes” on page 84 .
5 Click Register to create the probe.
6 Close all open dialog boxes.
An icon for the new probe appears under the Monitor Manager in the ClusterCATS
Explorer.
Removing JRun probes
To remove a JRun probe:
1 Open the ClusterCATS Explorer.
2 Select the cluster_name > Monitor Manager > monitor_name > probe_name in the left
pane.
3 Select Probe > Delete or right-click the probe and select Delete.
Configuring JRun probes in UNIX
This section describes the following:
•
“Adding JRun probes” on page 89
•
“Editing and removing JRun probes” on page 91