MACROMEDIA COLDFUSION MX-CLUSTERCATS, Руководство пользователя

Страница: 91 / 156

Using ColdFusion probes 81
4 Click the New Probe button .
The ColdFusion Web Application Probe settings dialog box appears:
5 Configure the application probe settings as described in the table on page 79.
6 Click Register to create the probe.
7 Close all open dialog boxes.
An icon for the new probe appears under the Monitor Manager in the ClusterCATS
Explorer.
Removing ColdFusion probes
To remove a ColdFusion probe:
1 Open the ClusterCATS Explorer.
2 Select the cluster_name > Monitor Manager > monitor_name > probe_name in the left
pane.
3 Select Probe > Delete . Alternatively, you can right-click the probe and select Delete.
Configuring ColdFusion probes in UNIX
This section describes the following:
•
“Adding ColdFusion probes” on page 81
•
“Editing and removing ColdFusion probes” on page 83
Adding ColdFusion probes
To add a new ColdFusion probe:
1 Open the ClusterCATS Web Explorer if it is not already open.
2 Click the Show Cluster link.
The Show Cluster page appears.
3 In the Web Server Name field, enter the fully qualified host name of the server for
which you want to configure the ColdFusion probe.
4 Click OK.
The Cluster Member List page appears.
5 Click the Server Attributes link.
The Connect To Server page appears.
6 Select the server to add a probe to from the Web Server Name listbox.
7 Click OK.
The selected server’s Properties page appears.
8 Click the ColdFusion Probe link.
If there are existing probes for this server, the Probe List page appears.