MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support
13
MAOM-37447 Quad 24G/26G CDR with Integrated EML Driver Evaluation Module User Guide
Rev -
User Guide
DC-0014098
Start Macro
This function begins recording any register changes from the time that the button is clicked until it is clicked again
(once started the button will read “End Macro”). The results will be saved in a file which can be loaded back in later
(via the Load File command). When using this feature, consider enabling “Direct Write Mode” (see
In this mode, each change will be recorded to the script file in the order that it was executed. This is useful when
the order of the register writes is particularly important.
2.2.6
Alarm Auto-Read
The alarm panel on the right side of the interface is normally only updated when the “Read Status/Alarms” button is
clicked. However, checking the “Auto” check box next to the “Read Status/Alarms” button will cause the alarm
registers to be re-read at regular intervals (about twice per second).
Figure 2-9.
Alarm Panel
