Maco A-TS Series Скачать руководство пользователя

Страница: 4 / 56

WINDOWS ·

DOORS

· SLIDING DOORS

Important

Target

This documentation is intended exclusively for specialist companies and certified specialists.

The work-steps described here in may only be carried out by certified specialists.

Instructions for use

•

Unless otherwise indicated, measurements are made in millimetres.

• Assemble all hardware parts professionally as described in these instructions and observe

all safety instructions.

•

All diagrams are only symbolic.

•

With the spacer-block setting, observe the technical guideline No. 3 of the glazier trade

"Blocking of glazing units".

•

Observe the "Guidelines and Instructions for Product and Liability (GIPL)".

• Inform the end-user about the contents of the "Guidelines and Instructions for End Users

(GIEU)".

•

Printing errors, mistakes and changes are reserved.

Material notes

• The hardware described in this assembly instructions are made from anti-rust material or

galvanically pacified steel and sealed according to EN 12329. They must not be used in

environments with aggressive, corrosive air content.

•

Do not use acid-curing sealants, as these can lead to corrosion of the hardware parts.

•

The door lock elements may only be surface-treated before the hardware is installed.

Any subsequent surface treatment may restrict the functionality of the hardware. In this case,

no warranty claims can be made against the hardware manufacturer.

Содержание A-TS Series

























































Результаты поиска

Содержание A-TS Series

Отзывы:

Похожие инструкции для A-TS Series

Бренды по названию

Популярные бренды

Maco A-TS Series, Руководство по сборке

Результаты поиска

Содержание A-TS Series

Отзывы:

Похожие инструкции для A-TS Series

Бренды по названию

Популярные бренды