Macnaught OKTR585-1-001, Инструкция по эксплуатации

Страница: 18 / 24

E16
TECHNICAL DETAILS - HOSE REEL ASSEMBLY
SAFETY PRECAUTIONS
1. Use proper eye protection when assembling and using the hose reel.
2. Keep children away from the work area.
3. Personal injury and/or equipment damage may result if proper safety precautions are not
observed.
4. Ensure that reel is properly installed before connecting input and output hoses.
5. Bleed fluid/gas pressure from system before servicing reel.
6. Before connecting reel to supply line ensure that pressure does not exceed maximum
working pressure rating of reel.
7. Remember, even low pressure is very dangerous and can cause personal injury or death.
8. If a leak occurs in the hose or reel, remove system pressure immediately.
9. Ensure that reel, hose, and equipment being service are properly grounded.
10. If reel ceases to unwind or rewind, remove system pressure immediately.
11. Do not pull or jerk on hose.
WARNING: Exposure of skin directly to pressurized air, or fluids could result in severe
bodily injury.
INSTALLATION
1. Prior to mounting the hose reel, ensure that the supply line pressure does not exceed the
maximum working pressure of the hose reel.
2. Unpack and inspect reel for damage. Turn by hand to check for smooth operation.
3. Check for completeness.
4. Position the reel on the floor, wall or ceiling. Secure into place using four mounting bolts.
5. Depending on where the reel is placed, it may be necessary to adjust the hose bumper and
guide arm to use the hose properly. See the instructions on the next page to adjust the hose
bumper and reposition the guide arm.
Item No.
28608154 (M860154) S.A.E.100R1 Wire Braid 1/2"/12.5mm
Max Pressure
Hose Capacity
Material I.D. Length
15m/50ft 2320Psi (160Bar)
Ø440 [17.3"]
443.5 [17.5"]
502 [19.8"]
240 [9.5"]
105 [4.1"]
182 [7.2"] 216 [8.5"]
200 [7.9"]
Ø10.5 [0.4"]