3
PRIMING
Start rotating the handle until fluid starts flowing from
the outlet spout.
In the unusual event where the pump fails to prime.
Remove the outlet tube and pour about 30mL of the
same type of liquid into the pump outlet, then re-fit the
outlet spout and turn the handle to re-prime the pump.
TROUBLE
CAUSE
REMEDY
Pump does not
dispense fluid.
1) Pump not able to
create adequate suction.
1) Prime pump. Refer to “Priming”.
2) Pump is sucking in air.
2) Tighten and /or re-seal all
threaded connections.
Fluid leaking from
handle seal.
1) Damaged seal
(check fluid compatibility).
1) Check fluid compatibility with the PTFE,
replace damaged seal.
NOTE: No spare parts available
STAINLESS STEEL ROTARY DRUM PUMP
TROUBLE SHOOTING GUIDE
oultet
Outlet
®
Instruction manual
|
lubematebymacnaught.com
