2
INSTALLATION and USE
1. Assemble the outlet tube to
the pump head.
Note: Use PTFE tape or other
suitable thread sealant.
2. Attach the crank to the
shaft on the pump and tighten
bolt ensuring that the bolt
is aligned correctly into the
depression on the shaft.
5. Insert the pump into the drum.
6. When the suction tube touches the bottom of the drum,
securely screw the bung adaptor onto the drum. Now
tighten the bung adaptor securely to the suction tube.
GENERAL INFORMATION
This self priming pump can pump fluid in reverse
if required .
Please take a few moments to read this manual
before installing, and operating your stainless steel
rotary pump.
Hydrochloric acid, Sulfuric acid etc.
STAINLESS STEEL ROTARY DRUM PUMP
3. Assemble the suction tube
using PTFE tape or other suitable
thread sealant.
4. Slide the bung adaptor onto
the suction tube and tighten at
the appropriate position.
DO NOT USE WITH
®
lubematebymacnaught.com
|
Instruction manual
