Macnaught FTWM120-001, Инструкция по эксплуатации

Страница: 4 / 20

SAFETY DEVICES
GENERAL SWITCH
It is placed on the motor body and allows the operator to set it on standby in a very short time.
Once the machine is stopped, the whole starting procedure can be repeated.
HARMFUL FUNCTIONS
The noise from the machine is below 70 dB (A).
HARMFUL EMISSIONS
Steam emission is so reduced to result irrelevant.
FIRE PREVENTION
1. In case of fire never use water, but extinguishing powders charged with CO2 cat. A-B-C-D
only, employing the extinguishers placed next to the machine. Combustion of paints and
plastic parts may produce toxic emissions: use the normal precautions to be employed in
case of fire (always refer to the security supervisor of the place of installation).
3. MAXIMUM BY-PASSING TIME: 3 MINUTES.
4. DO NOT RUN WITHOUT FLUID.
DUTY CYCLE FOR DC PUMPS
Extreme operating conditions with working cycles longer than 30 minutes can cause the motor
temperature to rise, thus damaging the motor itself.
Each 30-minute working cycle should always be followed by a 30-minute power-off cooling
phase.
NOTICE:
THE VISION IS BUILT PAYING MAXIMUM CARE TO USER’S AND MAINTENANCE
ENGINEER’S SECURITY.
E2