Mackworth SA400, Руководство пользователя

Страница: 10 / 32

999565 – Revision A P a g e | 10 of 32
3.3 Stand Aid Assembly
A. Carefully open the box and remove all loose parts and excess packaging from the
box.
2 person lift recommended for the following points.
B. Carefully holding onto the handle and boom, lift the Stand Aid components out of
the box. Place carefully onto the floor.
C. With one person lifting up from the front castors and one person lifting up from
the rear castors, raise the base from the box and place the Stand Aid base on a
flat surface and ensure the rear braked castors are locked.
D. Remove Star handle from the top of the base and slot the mast and boom
assembly onto the base. (As shown in Fig. 2 and 3).
E. Ensure all cables are clear from entrapment while fitting the base and mast
together.
Please ensure both hands are on the handle when lifting the mast into position,
as there is a risk of finger trap.
F. When the mast if fully engaged with the base, fit and fully tighten the mast
star handles is the following order (as shown in Fig. 4 and 5).
Ensure the mast is fully seated into the base and the mast locking wheel
is in position and tight before using the Stand Aid.
NOTE: To disassemble the Stand Aid into the two main sections (Mast/boom and Base)
simply follow the pervious steps in reverse.
Figure 2
Figure 4
Figure 5
Figure 3