SA160E User Manual Rev 3 - Aug 2016
Page 4
1.0 ASSEMBLY INSTRUCTIONS
Mackworth SA160E Stand Aid
5 The control unit is already fitted to the
mast, so assembly is not required
.
Check the emergency stop button (red
button) located on the control box is in
the out position (i.e. out )
6 Fit the battery pack to the control box
making sure it clicks into position in the
top of the bracket, as shown.
Emergency
stop button
Mast locking knobs
SAFETY NOTE: Possible finger trap. Keep fingers away from
end of mast when fitting to base unit.
4
.
Carefully take the boom/mast
assembly and slide bottom of the mast
into the base socket. When the mast is
fully engaged into the base, fit both of
the 2 mast locking knobs and tighten by
hand firmly