Mackie THUMP 212, Руководство пользователя

Страница: 5 / 21

Owner
’s Manual
5
Owner’s Manual
Hookup Diagrams
DUCKING FB ELIMINATOR OVERLOAD
CH1 CH2 MAIN
THRU
LINE
MIC
LINE
U U
MAX
LINE MIC
U
MAX
∞
-
∞
MAX -
∞
GAIN VOLUME GAIN
Thump loudspeakers are the perfect tool for singer-songwriters touring the local coffee shops. Bring your favorite axe
and mic, Thump loudspeakers and cables and power cords.
In this example, a Mackie EM-89D microphone is connected to the channel 1 input of a Thump loudspeaker, used
as the main PA. The Channel 1 gain knob should be set to Mic. The Mic/Line switch should be ENGAGED [Mic], as well.
Now grab your axe and plug it directly into the channel 2 input. Or if you use effects, connect the guitar to the effects
input and another cable from the effects output to the channel 2 input. Note that the gain knob is set to Line.
An additional Thump loudspeaker will be used for monitoring purposes. Simply connect a cable from the Thump PA’s
THRU jack to the Thump monitor’s channel 1 input. This gain knob should also be set to Line.
Keep in mind that these “MIC” and “LINE” markings are for reference only and may need to be raised or lowered.
Singer-Songwriter Setup