![background image](http://html1.mh-extra.com/html/mackie/thump-212/thump-212_owners-manual_3416014004.webp)
Thump
21
2 and Thump
21
5 P
ow
er
ed L
oudspeak
er S
eries
4
Thump212 and Thump215 Powered Loudspeaker Series
Getting Started
Introduction
The new Thump Loudspeakers are the next evolution
of the incredibly popular series, packed with more power,
capability, and bang-for-the-buck than ever before.
Completely redesigned from the ground up, Thump features
heavy-duty drivers, 1400W amplifiers, and powerful tools
to make your next gig easier than ever.
Now equipped with a Feedback Eliminator plus a Music
Ducking mode, Thump keeps the show running smooth
when it counts.
Add in ultra-versatile I/O, legendary Thump sound quality,
and easy portability, Thump is going to be your new favorite
loudspeaker.
How to Use This Manual:
After this introduction, a getting started guide will help
you get things set up fast. The hookup diagrams show
some typical Thump loudspeaker setups.
This icon marks information that is critically
important or unique! For your own good, read and
remember them...it is a good idea to pay special
attention to these areas in the Owner’s Manual
marked with the “VERY IMPORTANT” hand icon.
There’s an illustration of a microscope,
so, of course, you’re going to get more
detailed information when you see this
little guy. There are explanations of
features and practical tips listed here.
It’s a good idea to pay attention to text displayed
next to a note icon, as this icon draws attention
to certain features and functions relating to
the usage of the Thump Series.
The following steps will help you set up the loudspeakers
quickly.
1. Make all initial connections with the power switches OFF
on all equipment. Make sure the master volume, level and gain
controls are all the way down.
2. If not using a subwoofer, connect the outputs from
the mixing console (or other signal source) to the inputs
on the rear panel of the loudspeakers.
3. If using a subwoofer, connect the outputs from
the mixing console (or other signal source) to the inputs
on the subwoofer, then connect the high pass outputs
from the subwoofer to the inputs of the loudspeakers.
4. Push the line cord securely into the subwoofer’s /
loudspeaker’s IEC connectors and plug the other ends into
grounded AC outlets. The subwoofer/loudspeaker may accept
the appropriate voltage as indicated near the IEC connector.
5. Give a virtual high-five to your favorite live sound engineer.
6. Turn the mixer (or other signal source) on.
7. Turn the subwoofer on (if applicable).
8. Turn the loudspeakers on.
9. Make sure the loudspeaker’s channel gain knob(s)
are set to mic or line.
10. Be sure that the volume of the input is the same
as it would be during normal use.
11. Start the signal source and raise the mixer’s main
L/R fader up to a comfortably loud listening level.
Things to Remember:
• Never listen to loud music for prolonged periods. Please see
the Safety Instructions on page 2 for information on hearing
protection.
• As a general guide, the mixer (or other signal source) should
be turned on first, subwoofers next, and Thump loudspeakers
last. As such, the Thump loudspeakers should also be turned
off first, followed by the subwoofers, then the mixer. This will
reduce the possibility of any turn-on or turn-off thumps and
other noises generated by any upstream equipment from
coming out of the speakers.
• Save the shipping boxes and packing materials! You may
need them someday. Besides, the cats will love playing
in them and jumping out at you unexpectedly. Remember
to pretend like you are surprised!
• Save your sales receipt in a safe place.
Please write the serial numbers here for future reference
(i.e., insurance claims, tech support, return authorization,
make dad proud, etc.)
Purchased at:
Date of purchase:
Содержание THUMP 212
Страница 1: ...OWNER S MANUAL 1400W Powered Loudspeakers...